Acura TSX 98-2001


1. Turn ignition switch to ON (II)

2. Within 4 seconds press the LOCK or UNOCK button on one of the remotes.

(An unprogrammed remote can be used for this step.)

3. Within 4 seconds turn ignition switch to LOCK (0) position

4. Within 4 seconds turn the ignition switch to ON (II)

5. Repeat steps 2, 3 and 4 two more times using the same keyless remote

used in step 2

6. Within 4 seconds press the LOCK or UNLOCK button on the same remote.

Make sure the power door locks cycle to confirm you are in programming

mode.

7. Within 10 seconds press the LOCK or UNLOCK button on same remote.

8. Within 10 seconds press the LOCK or UNLOCK button on all other

remotes you want to program. Make sure door locks cycle after you push

each remote button to confirm system has accepted the remote.

9. Turn the igniton switch to LOCK (0) to exit programming mode.

10. Test remote(s)