Cadillac XLR 2004-07 With Prox

Cadillac XLR 2004-07 (With Prox) Key Programming


GM#10354922

Chip/Transponder ID: 46 Philips Encrypted (Circle +)

Key Code Series: G001-3631

Metal Key: B106 or B109

***Before you start you will need to have the right key properly cut by a local locksmith so it turns the ignition switch***

If you have one programmed remote and you want to add another.

  1. Open trunk
  2. Place programmed key within interior of vehicle
  3. Insert key into trunk lock
  4. Within 5 seconds turn key to unlock position 5 times
  5. DIC (Driver information center) will display READY FOR FOB 2
  6. Place new unprogrammed key in fob pocket located in glove box with buttons facing to the right of the vehicle
  7. Driver information center should display READY FOR FOB 3 this step should be done only if you have more than one new key you want to add to car.
  8. If you do not have additional keys you want to program, move to next step
  9. Exit programming mode by pressing the ignition button (OFF/ACC button)

If you have no working remotes.

  1. Switch ignition off
  2. Place new key into the fob pocket located in the glove box
  3. Insert key into trunk lock and within 5 seconds turn to unlock position 5 times
  4. DIC (Driver information center) will display OFF/ACC TO LEARN
  5. Pres the ignition button (OFF/ACC)
  6. DIC will display WAIT 10 MINUTES
  7. After the 10 min DIC will diaplay OFF/ACC TO LEARN Repeat steps 5-6 two more times. (You will have to wait 10 min. 3 times, 30 minutes in total)
  8. After the final 10 minutes pass the car should signal and DIC will display READY FOR FOB 1
  9. Car should sound another signal indicating successful programming and DIC will display READY FOR FOB 2
  10. If you do not have additional keys to program, remove key and test
  11. If you do have additional keys to program, replace programmed key in fob pocket with unprogrammed key and follow DIC instructions